Tungsten Products

    Powder

    Flux

    Rods

    Wires

    Plates & Sheets

    Crucibles & Tubes

    Sputtering Targets

    Parts for Industrial Furnace

    Parts for Quartz Continuous       Melting Furnace

    Tungsten Copper

    Tungsten Heavy Alloys

    Evaporation Boats & Coils

    W-Re Thermocouple

    Special Shape Parts

  Molybdenum Products

  Tungsten Electrodes

  Heat Sinks of Electronic     Packaging
Current Position: Home >> Products >> Tungsten Products  (Click to enlarge)
Tungsten has the highest melting point (3410°C) and the lowest vapour pressure among all the metals, which makes it a preferred candidate for use as a high performance material in a variety of high temperature products and processes.

Main Characteristics:
  • High melting point (3410°C)
  • Low thermal expansion
  • High electrical resistance
  • Low vapour pressure
  • Good thermal conductivity
  • High density

Mass Characteristics:
  • Symbol: W
  • Atomic Number: 74
  • Atomic Weight: 183.85
  • Density: 19.254 g/cc

Thermal Properties:
  • Melting Point: 3410°C (+ 20°C)
  • Boiling Point: 5900°C
  • Specific Heat: 0.14 kJ/kg x K at 20°C
  • Latent Heat of Fusion: 209 kJ/kg (estimated)
  • Thermal Conductivity: 129 W/m x K at 20°C
  • Evaporation Heat: 444 J/g

Electrical Properties:
  • Electrical Resistivity: 5.5 μΩ/cm at 20°C
  • Temperature Coefficient of the Electrical Resistivity: 0.00482 Ω/ΩK
  • Temperature of Superconductivity: 0.016 K

Mechanical Properties:
A lot of factors such as microstructure, impurity contents in the tungsten, other alloying elements and heat treatment (for example annealing conditions) inflence the machanical properties of tungsten. By offering various tungsten alloys, TLWM could satisfy the specific needs from customers.

Chemical Properties:
Tungsten is resistant to corrosion when the humidity is below 60%. However, it must be protected at elevated temperatures. Tungsten can oxidize in the presence of oxidizing gases at temperatures above 250°C. Despite this vulnerability, Molten glass, nitrogen, inert gases, molten metals and ceramic oxides only slightly affect it.



Product Schematic Process




ATTL Advanced Materials Co., Ltd.  Copyright ©2017  All Rights Reserved Beijing ICP No.16033339  SiteMaps
Tel: 0086-22-59213388(ext. 681,682,684,688) Fax: 0086-22-59215599 Email: sales@attl.cn attl@attl.cn  Website: www.attl.cn  www.tlwm.cn